Signal NVR2716 Manual do Utilizador descarregar pdf (Página 34)

- 34 -

Pic 3.3.3.11 UPNP setup

【Enable】Choose Enable to make sure all UPNP settings available

【HTTP】Route will automatically distribute HTTP port for the device,when IE viewing,it need this

port

【TCP】Router will automatically distribute TCP port for the device,when monitoring via CMS,it need

this port.

【Mobile Port】Router will automatically distribute Mobile Port for the device,when mobile monitor,it

need this port.

【WIFI】

NVR connect to wireless router via WIFI module, then to visit it through IP address, the precondition of

using this function is to make sure the NVR have connected with WIFI modern.

Pic 3.3.3.12 WIFI setup

【Search】：click【search】to search all the available wireless device in current range.

【enable】：tick it to enable firstly, then go for further setting.

【auto obtain IP address】：tick it to enable, device will auto obtain a WIFI IP.

【SSID】：wireless LAN name, auto match to the wireless device u connected.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 50 51

Sem comentários

Signal NVR2716 Manual do Utilizador Página 34